Ouvrir le menu
Fermer le menu

+33 (0)3 81 48 38 00

Removable bolster extensions

Description

Thanks to the aluminum construction, the weight of the bolster extension makes it possible to handle it manually. Only the brackets are fixed to the press bed. The same pair of bolster extensions can be shared between the different presses of a workshop.

Load/pair : 500 to 3000 Kg
Length of support: 300 to 1250 mm

Choose a declination

Light and sturdy

The extruded aluminiumprofiles is a perfect balance between strength and lightness.
Gripping it manually is easy for the operator. Its sturdy conception allows it to support heavy loads.

Fast set-up

With the tool brackets, it is very fast to attach the bolster extensions to the press and to make it fit different tool widths.
It is also possible to share a pair of bolster extensions between different presses.

Safety

The bolster extensions are fitted out with a retractable stop for low tonnage tools and a progressive ramp stop for high tonnage tools.

Assembly & use

The tool change rails are used exclusively in pairs and are positioned and held in place at the front of the press table with the assistance of a set of threaded brackets. Different sets of brackets are available, depending upon the tool change rails and upon requirements.
Tools are moved manually or with the assistance of a motorised unit. The force required for movement depends upon the mass of the tool, its material and the quality of the surface finish.

Declinations

  Reference
Capacity of the pair (kg)
Length
Height
Number of modules
Accessories
HTCF
To storage your bolster....
BF1
Brackets are used to attach TCF 05...
  BFA 1
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF1
Brackets are used to attach TCF 05...
  BFA 1
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF1
Brackets are used to attach TCF 05...
  BFA 1
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF1
Brackets are used to attach TCF 05...
  BFA 1
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF2
Brackets are used to attach TCF 1 & 2...
  BFA 2
brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracke...
Accessories
HTCF
To storage your bolster....
BF3
Brackets are used to attach TCF 3...
BF R
Brackets are used to attach TCP 2 & 4....
  BFA 3
Brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracket...
Accessories
HTCF
To storage your bolster....
BF3
Brackets are used to attach TCF 3...
BF R
Brackets are used to attach TCP 2 & 4....
  BFA 3
Brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracket...
Accessories
HTCF
To storage your bolster....
BF3
Brackets are used to attach TCF 3...
BF R
Brackets are used to attach TCP 2 & 4....
  BFA 3
Brackets are used to allow access from the front of a press table when the tool change rails are not used. These bracket...