|
Fixed brush type 235 |
The fixed brush type 235 is used in where it is particularly necessary to remove scrap and clean the surface of the belt.
Not available for conveyor belts with transverse ledges. |
|
|
Hopper type 230 |
The hopper Type 230 is suitable for use with the trough type retaining guide systems 114 and 117, and the retaining guide covers designed to prevent scrap particle trapping 218 and 220..
- Min. dimension X= 150 mm can be increased in increments of 10 mm, up to max. X= 250 mm.
- Min. dimension Y= 200 mm can be increased in increments of 25 mm, up to max. Y= 600 mm.
- The dimension Z should be equal to the height of the retaining guides on Models: 114, 117, 218, 220
|
|
|
Retaining guides with scrap particle trapping prevention, type 218 |
Retaining guides incorporating scrap particle trapping prevention
- H min.= 25 mm or larger, in increments of 5 mm, up to max. H = 50 mm.
|
|
|
Retaining guides with scrap particle trapping prevention, type 219 |
- |
|
|
Retaining sides type 114 |
- |
|
|
Support with height adjustement type 140 - 141 |
|
|
|
Support with height adjustement type 150 - 151 |
- |
|
|
Support with height adjustement type 160 - 161 |
- |
|
|
Support with height adjustement type 170 - 171 |
- |
|
|
Fixed brush type 235 |
The fixed brush type 235 is used in where it is particularly necessary to remove scrap and clean the surface of the belt.
Not available for conveyor belts with transverse ledges. |
|
|
Retaining sides type 114 |
- |
|
|
Retaining sides type 115 |
- |
|
|
Retaining guides with scrap particle trapping prevention, type 218 |
Retaining guides incorporating scrap particle trapping prevention
- H min.= 25 mm or larger, in increments of 5 mm, up to max. H = 50 mm.
|
|
|
Retaining guides with scrap particle trapping prevention, type 219 |
- |
|
|
Hopper type 230 |
The hopper Type 230 is suitable for use with the trough type retaining guide systems 114 and 117, and the retaining guide covers designed to prevent scrap particle trapping 218 and 220..
- Min. dimension X= 150 mm can be increased in increments of 10 mm, up to max. X= 250 mm.
- Min. dimension Y= 200 mm can be increased in increments of 25 mm, up to max. Y= 600 mm.
- The dimension Z should be equal to the height of the retaining guides on Models: 114, 117, 218, 220
|
|
|
Support with height adjustement type 140 - 141 |
|
|
|
Support with height adjustement type 130 - 131 |
|
|
|
Support with height adjustement type 150 - 151 |
- |
|
|
Support with height adjustement type 160 - 161 |
- |
|
|
Support with height adjustement type 170 - 171 |
- |
|
