Conveyor belts models 803 (Thickness= 80mm)

Description

These models use the following types of engineering plastic belts:

PVC (PVC)
POLYURETHANE (PU)
PARASKIN (PSK)
SILICONE (SIL)
STAINLESS STEEL
CARBON STEEL

Model 803 is also available with wire mesh belt.

Our range of modular conveyor belts consists of standard modules
right. Possibility to choose the orientation of your engine, right or left,
vertical or horizontal.
This choice is made in relation to the direction of scrolling of the belt.

Available with accessories below.

Please add in your quote, model of conveyor, belt witdth A and frame lenght B.

Accessories

Reference	Name	Description
	Fixed brush type 235	The fixed brush type 235 is used in where it is particularly necessary to remove scrap and clean the surface of the belt. Not available for conveyor belts with transverse ledges.
	Adjustable scraper for belt cleaning, type 245	The adjustable scraper type 245 is used where it is particularly needed to remove scrap from the belt and thoroughly clean it. It is applied on polyurethane conveyor belts with smooth antiadhesive surface and without transverse cross sections.
	Drip tray, type 180	The drip tray (fluid collecting trough) type 180 is designed to collect liquid that may drip from parts carried on conveyors. The standard version is made of painted sheet. Customers should specify the liquid involved, so that we can select and offer a tray with suitable coating or of suitable material.
	Retaining guides with scrap particle trapping prevention, type 218	Retaining guides incorporating scrap particle trapping prevention H min.= 25 mm or larger, in increments of 5 mm, up to max. H = 50 mm.
	Retaining guides with scrap particle trapping prevention, type 219	-
	Retaining guides with scrap particle trapping prevention, type 220	-
	Retaining guides with scrap particles trapping prevention, type 221	-
	Hopper type 230	The hopper Type 230 is suitable for use with the trough type retaining guide systems 114 and 117, and the retaining guide covers designed to prevent scrap particle trapping 218 and 220.. Min. dimension X= 150 mm can be increased in increments of 10 mm, up to max. X= 250 mm. Min. dimension Y= 200 mm can be increased in increments of 25 mm, up to max. Y= 600 mm. The dimension Z should be equal to the height of the retaining guides on Models: 114, 117, 218, 220
	Support with height adjustement type 140 - 141
	Support with height adjustement type 130 - 131
	Support with height adjustement type 150 - 151	-
	Support with height adjustement type 170 - 171	-